Por favor, use este identificador para citar o enlazar este ítem:
http://hdl.handle.net/20.500.12423/7218
Registro completo de metadatos
Campo DC | Valor | Lengua/Idioma |
---|---|---|
dc.contributor.advisor | Lopez Carranza, Atilio Ruben | es_PE |
dc.contributor.author | Cabrera Sanchez, Cleisler | - |
dc.coverage.spatial | Chiclayo | es_PE |
dc.creator | Cabrera Sanchez, Cleisler | - |
dc.date.accessioned | 2024-05-09T16:37:26Z | - |
dc.date.available | 2024-05-09T16:37:26Z | - |
dc.date.issued | 2023 | - |
dc.identifier.citation | C. Cabrera Sanchez. "Sustitución del agregado fino por Policloruro de Vinilo en el concreto estructural," tesis de licenciatura, Fac. de Ingienería, Univ. USAT, Chiclayo, Perú, 2023. [En línea]. Disponible en: | es_PE |
dc.identifier.other | RTU006901 | - |
dc.identifier.uri | http://hdl.handle.net/20.500.12423/7218 | - |
dc.description.abstract | Este artículo es de tipo experimental, ya que se evaluó el comportamiento que tiene el concreto estructural al agregarle PVC en sustitución del agregado fino en un 20%, 30% y 40%. Se determinaron las propiedades físicas del policloruro de vinilo (PVC) y los agregados (fino y grueso), obteniendo que el peso específico del PVC es de 1.14 gr/cm3 y del agregado fino es de 2.59 gr/cm3. Se hicieron pruebas de granulometría, peso específico, contenido de humedad, resistencia a la compresión, flexión y tracción. Del mismo modo se desarrolló un concreto patrón y concretos reemplazando el agregado fino en ciertas cantidades de PVC triturado. Como resultado de los ensayos de resistencia a la compresión se tiene que para el concreto patrón la resistencia es de 242 kg/cm2, para un concreto teniendo un 20% de PVC es de 214 kg/cm2, para un 30% de PVC es de 209 kg/cm2 y para un 40% de PVC es de 153 kg/cm2. Para la prueba de resistencia a flexión a mayor porcentaje de PVC la resistencia tiende a disminuir, pero estando dentro de los límites permitidos de la norma técnica. | es_PE |
dc.description.abstract | This article is of an experimental nature, since the behavior of structural concrete was evaluated by adding PVC to replace the fine aggregate by 20%, 30% and 40%. The physical properties of polyvinyl chloride (PVC) and the aggregates (fine and coarse) were determined, obtaining that the specific weight of PVC is 1.14 g/cm3 and that of the fine aggregate is 2.59 g/cm3. Tests were carried out on granulometry, specific weight, moisture content, compressive strength, flexural strength and tensile strength. In the same way, a standard concrete and concretes were developed by replacing the fine aggregate with certain quantities of crushed PVC. As a result of the compressive strength tests, for the standard concrete the resistance is 242 kg/cm2, for a concrete with 20% PVC it is 214 kg/cm2, for 30% PVC it is 209 kg/cm2 and for 40% PVC it is 153 kg/cm2. For the flexural strength test, the higher the percentage of PVC, the resistance tends to decrease, but is within the limits allowed by the technical standard. | es_PE |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Católica Santo Toribio de Mogrovejo | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | http://creativecommons.org/licenses/by/4.0/ | es_PE |
dc.subject | Concreto estructural | es_PE |
dc.subject | Agregado fino | es_PE |
dc.subject | Resistencia a la compresión | es_PE |
dc.subject | Structural concrete | es_PE |
dc.subject | Fine aggregate | es_PE |
dc.subject | Compressive strength | es_PE |
dc.title | Sustitución del agregado fino por Policloruro de Vinilo en el concreto estructural | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
dc.publisher.country | PE | es_PE |
thesis.degree.discipline | Ingeniería Civil Ambiental | es_PE |
thesis.degree.grantor | Universidad Católica Santo Toribio de Mogrovejo. Facultad de Ingeniería | es_PE |
thesis.degree.name | Bachiller en Ingeniería Civil Ambiental | es_PE |
renati.advisor.dni | 32965940 | - |
renati.advisor.orcid | https://orcid.org/0000-0002-3631-2001 | es_PE |
renati.author.dni | 74620339 | - |
renati.discipline | 732026 | es_PE |
renati.juror | Lopez Carranza, Atilio Ruben | es_PE |
renati.level | http://purl.org/pe-repo/renati/nivel#bachiller | es_PE |
renati.type | http://purl.org/pe-repo/renati/type#trabajoDeInvestigacion | es_PE |
dc.subject.ocde | http://purl.org/pe-repo/ocde/ford#2.01.00 | es_PE |
usat.linea | Desarrollo e innovación tecnológica | es_PE |
Aparece en las colecciones: | Escuela de Ingeniería Civil Ambiental |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
TIB_CabreraSanchezCleisler.pdf | 1.56 MB | Adobe PDF | Visualizar/Abrir | |
Reporte de turnitin.pdf | 4.62 MB | Adobe PDF | Visualizar/Abrir Solicitar una copia | |
Autorización.pdf | 32.08 kB | Adobe PDF | Visualizar/Abrir Solicitar una copia |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons